Your one-stop shop for metal sawing and structural steel fabricating machinery

Robust, circular cold saw machines primarily for ferrous (but also non-ferrous) metals. Over the years, Kaltenbach has supplied dozens of exhaust tube manufacturers with customized KKS machines with added features for cutting thin-walled bent steel and stainless steel tubing. Available enhancements include:


  • Pre-drilled hole pattern in table to facilitate quick fixture changes
  • Coolant atomizer system to reduce clean up and washing downstream
  • Two palm cycle start
  • Fast approach blade setting for tubes fixtured above the table


Kaltenbach can customize a standard KKS 400 H or KKS 450 H machine to suit your needs, or we also offer the KKS 450 R, which is designed as a jig & fixture machine from the start. All of these machines utilize the Kaltenbach up-stroking blade principle, which provides several key advantages:


  • The blade immediately enters the cut for reduced cycle time
  • Coolant is applied to the blade below the table for less mess
  • Safe set-up with all the saw gear components located below the table
  • Long blade life due to rigid feed stroke and no re-cutting of chips.


Ease of set-up and use combines with durability and long-term reliability. Tens of thousands of KKS cold saws have been supplied worldwide.

Kaltenbach KKS 400/450 Circular Cold Saws for Exhaust Trimming/Fixtured Jobs
Item
Saw Blade DiameterDimensions Round: 90°/45°Square: 90°
KKS 400 H

15.75 in

400 mm

35 x 46 x 70 in5.1 in4.7 in
KKS 450 H

17.72 in

450 mm

40 x 52 x 78 in5.9 in5.5 in
KKS 450 R

17.72 in

450 mm

35 x 48 x 71 in5.5 in5.1 in
KKS 400 T

15.75 in

400 mm

41 x 35 x 72 in5.1N/A